Tag: behringer
-
PU-2: Meet Beta!
The PU-2 made it to Beta. As you can see in the picture above, the PU-2 is an external module, linked to a connecting board inside the Behringer FCB1010 with a flat cable. The reason for the external module is that I wanted Beta testers to feel totally safe about their FCB1010. Since the current…
-
Side Project: Data Stucture – Application
If you were patient enough and read through the two previous posts on this subject, you might be wondering how this applies to the PU-2 pedal board in practice. Even if you were not patient enough, here’s how the data structure will be used: The data structure was developed to provide a very simple programming…
-
PU-2: emulating the FCB1010!
The PU-2 is now able to emulate pretty much everything a stock FCB1010 can do. I was actually able to send and receive sysex data to/from iFCB, a programming software available on the Mac. One thing that the PU-2 doesn’t do is let the user program it using it’s own foot switches. It was decided…
-
The Behringer FCB1010 Pedal Board
I have just purchased a new Behringer FCB1010 pedal board. Why? First, it does quite a bit of what I plan to do with my Line 6 pedal board. Second, it’s cheap. I know that this is an old design, that it has been around for years (at least since 2003), and that there are…